smartctl 6.2 2013-04-20 r3812 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.2
Device Model: ST960821A
Serial Number: 5LF00BKY
Firmware Version: 3.05
User Capacity: 60,011,642,880 bytes [60.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
Local Time is: Sun Jun 30 12:21:01 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 84) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 057 054 034 Pre-fail Always - 137656180
3 Spin_Up_Time 0x0003 097 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2619
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 7
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 155231196
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8469
10 Spin_Retry_Count 0x0013 100 099 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2644
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2650
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 221980
194 Temperature_Celsius 0x0022 032 049 000 Old_age Always - 32 (0 11 0 0 0)
195 Hardware_ECC_Recovered 0x001a 057 054 000 Old_age Always - 137656180
197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 21
198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 21
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1061 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1061 occurred at disk power-on lifetime: 8467 hours (352 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b8 26 11 e0 00 00:37:25.914 READ DMA
27 00 00 00 00 00 e0 00 00:37:25.914 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:37:25.910 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 00:37:25.898 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:37:25.898 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 1060 occurred at disk power-on lifetime: 8467 hours (352 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b8 26 11 e0 00 00:37:13.313 READ DMA
27 00 00 00 00 00 e0 00 00:37:13.313 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:37:13.308 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 00:37:07.033 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:37:07.032 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 1059 occurred at disk power-on lifetime: 8467 hours (352 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b8 26 11 e0 00 00:37:13.313 READ DMA
27 00 00 00 00 00 e0 00 00:37:13.313 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:37:13.308 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 00:37:07.033 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:37:07.032 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 1058 occurred at disk power-on lifetime: 8466 hours (352 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b8 26 11 e0 00 00:36:54.417 READ DMA
27 00 00 00 00 00 e0 00 00:36:54.359 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:36:54.356 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 00:37:07.033 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:37:07.032 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 1057 occurred at disk power-on lifetime: 8466 hours (352 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 b8 26 11 e0 00 00:36:54.417 READ DMA
27 00 00 00 00 00 e0 00 00:36:54.359 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 02 00:36:54.356 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 00:36:54.345 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:36:54.335 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 8467 1124028
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.