smartctl 6.2 2013-04-20 r3812 [i686-linux-3.2.0-4-686-pae] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.2 Device Model: ST960821A Serial Number: 5LF00BKY Firmware Version: 3.05 User Capacity: 60,011,642,880 bytes [60.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Sun Jun 30 12:21:01 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 426) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 057 054 034 Pre-fail Always - 137656180 3 Spin_Up_Time 0x0003 097 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2619 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 7 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 155231196 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8469 10 Spin_Retry_Count 0x0013 100 099 034 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2644 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2650 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 221980 194 Temperature_Celsius 0x0022 032 049 000 Old_age Always - 32 (0 11 0 0 0) 195 Hardware_ECC_Recovered 0x001a 057 054 000 Old_age Always - 137656180 197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 21 198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 21 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 1061 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1061 occurred at disk power-on lifetime: 8467 hours (352 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 b8 26 11 e0 00 00:37:25.914 READ DMA 27 00 00 00 00 00 e0 00 00:37:25.914 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 02 00:37:25.910 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:37:25.898 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:37:25.898 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1060 occurred at disk power-on lifetime: 8467 hours (352 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 b8 26 11 e0 00 00:37:13.313 READ DMA 27 00 00 00 00 00 e0 00 00:37:13.313 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 02 00:37:13.308 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:37:07.033 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:37:07.032 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1059 occurred at disk power-on lifetime: 8467 hours (352 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 b8 26 11 e0 00 00:37:13.313 READ DMA 27 00 00 00 00 00 e0 00 00:37:13.313 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 02 00:37:13.308 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:37:07.033 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:37:07.032 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1058 occurred at disk power-on lifetime: 8466 hours (352 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 b8 26 11 e0 00 00:36:54.417 READ DMA 27 00 00 00 00 00 e0 00 00:36:54.359 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 02 00:36:54.356 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:37:07.033 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:37:07.032 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1057 occurred at disk power-on lifetime: 8466 hours (352 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 bc 26 11 e0 Error: UNC at LBA = 0x001126bc = 1124028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 b8 26 11 e0 00 00:36:54.417 READ DMA 27 00 00 00 00 00 e0 00 00:36:54.359 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 02 00:36:54.356 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:36:54.345 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 00:36:54.335 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 8467 1124028 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.